Support
Product Support
FAQs
Downloads & Manuals
Got A Return
Warranty
Recycling Program
Home >   Support  >  FAQs
 
FAQs
Frequently Asked Questions
Back to PCI Wireless N FAQs
 
How do I assign a static IP address to my adapter on Windows 2000?
Step 1 Right-click on My Network Places and select Properties.


Step 2 Right-click on the Local Area Connection which represents your network card and select Properties.

Step 3 Highlight Internet Protocol (TCP/IP) and click Properties.


Click Use the following IP address and enter an IP address that is on the same subnet as the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network.

Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).

Secondary DNS is not needed or enter a DNS server from your ISP.

Click OK twice. You may be asked if you want to reboot your computer. Click Yes.
 
 
 
 
 
Check out our online resources below
 
 
Downloads Where to Buy Support Home
Manuals, Drivers, Firmware, Specsheets Retail and E-tail Locations Find the Support
You Need
 
 
 
   
   
Customer Service 408.856.0614
Technical Support 408.856.0576
 
 

CONTACT US | SITEMAP | JOBS | PRESS | PRIVACY | WEBSITE FEEDBACK Bookmark and Share
COPYRIGHT © 2015 WINTEC INDUSTRIES ALL RIGHTS RESERVED